DPF 410

Digital Print Pressure-Sensitive Monomeric Vinyl Film

DPF 410 is a 3.2-mil (80 micron) monomeric calendered film with a clear or tinted solvent-based pressure-sensitive adhesive. The bright white point on the facestock will ensure your graphics are vibrant, with opacity to keep a crisp image. DPF 410 has a strong adhesion to ensure the film will bond well with the substrate throughout the duration of the product life. The single-sided polycoated liner is suitable for contour cutting & decals. DPF 410 is available in a white gloss finish. DPF 410 is rated for outdoor durability up to 1 year (unprinted). Printed durability is dependent on the ink system used. 

Applications & Features

  • Cost effective solution short-term promotional graphics
  • Flat surface applications
  • Strong adhesion for lasting impressions
  • Bright White Point for Attractive Graphics
  • Optimal Liner Performance for Contour Cutting & Decals
  • Compatible on Eco-Solvent and Solvent print systems

Performance & Physical Data

Property Test Methods Typical Value
Surface Finish Gloss Meter 60° Reflection 70 to 90 Gloss Units (Gloss), Up to 30 Gloss Units (Matte)
Thickness Micrometer, Federal Bench Type 3.2-mil (80 micron)
Tensile Strength Tensile Tester with 2-in (51 mm) jaw separation; crosshead speed of 12 in/min. (5.1 mm/s), web direction ≥ 12.0 lb/in ≥ 2.15 kg/cm
Elongation Instron Tensile Tester as above ≥ 100%
Shelf Life (In Box) Ideal Storage Temperature 70°F (21°C) and 50% relative humidity 1 year from factory shipment
Application Temperature Range On clean, dry substrate 60°F a 90°F 15°C a 32°C
Service Temperature Range On clean, dry substrate -20°F a 150°F -29°C a 65°C
Dimensional Stability 158°F (70°C), 48 hours 30-mil 0.75 mm
Peel Adhesion PSTC-1, 15 min, 70°F (21°C) ≥ 3.00 lb/in ≥ 0.53 kg/cm
Liner Release TLMI Release at 90°, 300 in/min (760 cm/min) 100 g/2 in 19.7 g/cm
Standard Terms & Conditions Apply

Terms & Conditions

The following is made in lieu of all warranties expressed or implied:

All statements, technical information and recommendations published by Arlon relating to Arlon products are based on tests believed to be reliable and within the accuracy of the equipment used to obtain the specific values. Their accuracy or completeness is not guaranteed and Arlon makes no warranty with regard thereto. Seller’s and manufacturer’s only responsibility shall be to replace any quantity of the product proved defective. Seller and manufacturer shall not be liable for injury, loss or damage, direct or consequential, arising out of use or the inability to use the product. Nor shall seller or manufacturer be liable for any costs or expenses incurred in the processing or printing on the product. Before using, user shall determine the suitability of the product for its intended use. User assumes all risk and liability of every nature in connection therewith. No statements or recommendations other than those contained in the technical information published by Arlon shall have force or effect unless contained in an agreement manually signed by the officers of seller and manufacturer.