DPF 207

Removable Interior Wall Decoration Vinyl Film

DPF 207 is a 6-mil (150 micron) matte white vinyl film with a clear removable pressure-sensitive adhesive. The adhesive is specially designed to have initial repositionability to substrates such as smooth painted non-vinyl walls without compromising the ultimate bond. DPF 207 has a premium moisture stable polycoated lay-flat liner that is optimal for printing on a variety of print systems.

Applications & Features

  • Home décor
  • Retail POP displays
  • Interior wall decorations, advertising and murals on smooth painted non-vinyl walls
  • Digital printing with a wide variety of direct print systems, such as solvent, UV and UV screen

Performance & Physical Data

Property Test Methods Typical Value
Surface Finish Gloss Meter 60° Reflection ≤ 15 units
Thickness Micrometer, Federal Bench Type 6-mil (150 micron)
Tensile Strength Tensile Tester 2-in (51 mm) jaw seperation; crosshead speed of 12 in/min. (5.1 mm/s) 20 lb/in 3.6 kg/cm
Elongation Instron Tensile Tester as above ≥ 125%
Shelf Life Free from excessive moisture, temperature, direct sunlight 2 Years
Storage Temperature 85°F or lower
Application Temperature Range On clean, dry substrate 50°F to 90°F 10°C to 30°C
Service Temperature Range On clean, dry substrate -20°F to 176°F -29°C to 80°C
Dimensional Stability Shrinkage After 158°F (70°C), 48 hours aging < 25 mils < 0.635 mm
Peel Adhesion PSTC-1, 15 min, RT 70°F (21°C) 1.1 lb/in 0.20 kg/cm
Liner Release TLMI Release at 90°, 300 in/min (760 cm/min) 45 g/2 in 9 g/cm

Terms & Conditions

The following is made in lieu of all warranties expressed or implied:

All statements, technical information and recommendations published by Arlon relating to Arlon products are based on tests believed to be reliable and within the accuracy of the equipment used to obtain the specific values. Their accuracy or completeness is not guaranteed and Arlon makes no warranty with regard thereto. Seller’s and manufacturer’s only responsibility shall be to replace any quantity of the product proved defective. Seller and manufacturer shall not be liable for injury, loss or damage, direct or consequential, arising out of use or the inability to use the product. Nor shall seller or manufacturer be liable for any costs or expenses incurred in the processing or printing on the product. Before using, user shall determine the suitability of the product for its intended use. User assumes all risk and liability of every nature in connection therewith. No statements or recommendations other than those contained in the technical information published by Arlon shall have force or effect unless contained in an agreement manually signed by the officers of seller and manufacturer.

ADDITIONAL CONSIDERATIONS

Arlon does not guarantee the successful application or removal of this film to painted interior & exterior walls due to the wide varieties in paints and sealants, especially for zero or low VOC paints.

If used for applications besides those recommended in this Product Information Bulletin, it is highly recommended that the customer determine the compatibility and removability of the product and paint in question. Your Arlon Sales Manager can provide a Wall Wrap Questionnaire to help understand product performance requirements.

Copyright © Arlon Graphics, LLC. All Rights Reserved.