Trucs et Astuces | Arlon Graphics | Arlon Graphics

Astuces

Informatif

Cut Graphic Film Adhesion Build (#15)

Digital Printing Preprint Considerations (#29)

Digital Printing: Graphic Protection (#31)

Digital Printing: On the Printer (#30)

Mottling of Vinyl Film (#13)

Overcoating and Decorating Vinyl Film (#19)

Paints and Coatings - Dry Versus Cured (#04)

Printing on Reflective Film (Series 2400 and Series 2450) (#12)

Proper Design for Airport Transit and Runway Signage (#27)

Reflective Film General Notes and Observations (#08)

Sélection et utilisation du papier d’application (#11)

Shelf Life of Vinyl Film (#14)

What is Silvering? (#55)

Preparation

Nettoyer un véhicule avant le covering (#53)

Surface Preparation (#01)

Wall Surface Test for Vinyl Compatibility (#39)

Installation

Application Rule of Thumb for All Graphic Film Installs (#02)

Application Tips for Marine Marking (#37)

Découpe des contours et lamination du film vinyle imprimé (#40)

Digital Printing Installation (#32)

How to Install on Rivets - Roller Methods (#50)

Installation Technique for Channels (#38)

Installations in Very Cold Weather (#07)

Lamination: Transfer Tape or Protective Overlaminating Film (#20)

Outgassing and Installing Arlon Print Media (#34)

Post-Heating (#16)

Reducing Bubbles Trapped by Vinyl Film (#17)

Removing Application Tape from Fleet and Vehicle Wrap Films (#23)

Use and Application For Etched Glass Film (#21)

Vehicle Wrap Tips (#35)

Wet Applications (#03)

Post Installation

Fleet & Vehicle Wrap Removal (#44)

Fleet Graphics Post-Care & Cleaning Instructions (#46)

Vinyl Removal Procedure for Wall Graphics (#42)

Vous ne trouvez pas ce que vous recherchez ?

Beaucoup de ces conseils proviennent de l'expérience de nos clients, assurez-vous de nous contacter afin que nous puissions vous aider et, à votre tour, aider les autres ! Le service technique d'Arlon est là pour vous.

Contactez le Service Client