DPF 4600GLX

USE & APPLICATION

DPF 4600GLX will resist weathering best when applied to vertical or upper outboard angles. Horizontal angles, such as hood and auto roof surfaces, will deteriorate more quickly than vertical. This is due to increased exposure to sun and moisture, as well as high deposition of dirt and atmospheric contaminants. Actual horizontal weathering will be dependent on maintenance, location and elemental exposure. Use heat and/or chemical when removing image from vehicle (see Installer Handbook for details).

*When wrapping curves and channels with DPF 46000GLX, it is recommended the product be draped and not stretched into areas with channels.
**Can be applied on low profile rivets. Please note that rivets vary in shape and size so tenting may appear.

GLOSSARY OF APPLICATION TERMS

Simple Curves: Defined as a slight stretch to the film in one direction (example: the side vehicle).

Complex Curves: Defined as extensive stretching (with or without heat) of material in multiple directions (example: bumpers).

Deep Channel: Channels in excess of a quarter inch in depth that require a “bridge and stretch” method for application.

FLOOR APPLICATIONS

DPF 4600GLX/MLX is recommended for short-term interior floor applications such as smooth floors, sealed concrete, ceramic tile, waxed vinyl flooring, sealed wood, marble and terrazzo, when used with Series 3420 Gloss/Matte and Series 3220 Gloss, which are approved under the European Standard Certification EN 14041 for slip-resistance for Floor Graphic Materials. To determine the best product for application Arlon always recommends testing prior to using the above products on the actual surface as product performance can vary greatly depending on the surface type, level of foot traffic, elemental exposure and floor condition. Due to these variables, Arlon only warrants the material(s) for standard manufacturers defect and is unable to offer a warranty for the performance or clean removability of these products for floor graphic applications. Please refer to Arlon’s Installation Guide for detailed techniques and best practices.

EN 14041 - Resilient, textile and laminate floor coverings
Determination of the anti-slip properties (EN 14041) : Determination of the dynamic coefficient of friction of floor materials in accordance with EN 14041.

TERMS & CONDITIONS

The following is made in lieu of all warranties expressed or implied:

All statements, technical information and recommendations published by Arlon relating to Arlon products are based on tests believed to be reliable and within the accuracy of the equipment used to obtain the specific values. Their accuracy or completeness is not guaranteed and Arlon makes no warranty with regard thereto. Seller’s and manufacturer’s only responsibility shall be to replace any quantity of the product proved defective. Seller and manufacturer shall not be liable for injury, loss or damage, direct or consequential, arising out of use or the inability to use the product. Nor shall seller or manufacturer be liable for any costs or expenses incurred in the processing or printing on the product. Before using, user shall determine the suitability of the product for its intended use. User assumes all risk and liability of every nature in connection therewith. No statements or recommendations other than those contained in the technical information published by Arlon shall have force or effect unless contained in an agreement manually signed by the officers of seller and manufacturer.