Tips and tricks | Arlon Graphics | Arlon Graphics

Tipps & Tricks

Informativ

Cut Graphic Film Adhesion Build (#15)

Digital Printing Preprint Considerations (#29)

Digital Printing: Graphic Protection (#31)

Digital Printing: On the Printer (#30)

Mottling of Vinyl Film (#13)

Overcoating and Decorating Vinyl Film (#19)

Paints and Coatings - Dry Versus Cured (#04)

Printing on Reflective Film (Series 2400 and Series 2450) (#12)

Proper Design for Airport Transit and Runway Signage (#27)

Reflective Film General Notes and Observations (#08)

Selection and Use of Application Paper (#11)

Shelf Life of Vinyl Film (#14)

What is Silvering? (#55)

Vorbereitung

Reinigung eines Fahrzeugs vor der Folierung (#53)

Surface Preparation (#01)

Wall Surface Test for Vinyl Compatibility (#39)

Installation

Application Rule of Thumb for All Graphic Film Installs (#02)

Application Tips for Marine Marking (#37)

Contour Cutting and Laminating Printed Vinyl (#40)

Digital Printing Installation (#32)

How to Install on Rivets - Roller Methods (#50)

Installation Technique for Channels (#38)

Installations in Very Cold Weather (#07)

Lamination: Transfer Tape or Protective Overlaminating Film (#20)

Outgassing and Installing Arlon Print Media (#34)

Post-Heating (#16)

Reducing Bubbles Trapped by Vinyl Film (#17)

Removing Application Tape from Fleet and Vehicle Wrap Films (#23)

Use and Application For Etched Glass Film (#21)

Vehicle Wrap Tips (#35)

Wet Applications (#03)

Nach der Installation

Fleet & Vehicle Wrap Removal (#44)

Fleet Graphics Post-Care & Cleaning Instructions (#46)

Vinyl Removal Procedure for Wall Graphics (#42)

Nicht gefunden wonach Sie suchen?

Viele dieser Tipps sind direktes von unseren Feedback von unseren Kunden, also kontaktieren Sie uns gerne, damit wir Ihnen helfen und wiederum anderen helfen können! Der technische Support von Arlon ist für Sie da.

Kundenservice kontaktieren