Arlon Provides an Interactive Experience at SGIA 2018

Oct 26,2018 / By Madi O'Connor / No Comment

A huge thank you to all that visited our booth at SGIA 2018 Las Vegas, NV! This year the show had more than 25,000 registered attendees with a sold-out Expo floor. The aisles were filled continuously with attendees excited to see the latest sign and graphics technology. Arlon had a very successful show, and in case you couldn’t make it here is what you missed.

Attendees flocked to the Arlon booth to get hands-on experience with the newest FLITE Technology™ products, SLX™ Cast Wrap and IllumiNITE Wrap™. During the show, the booth was busy with people participating and watching the Wrap Dash. Installers raced against the clock installing SLX Cast Wrap on a truck tailgate and with no surprise the ease of installation that FLITE Technology provides had participants wrapping at an average time of 6:45.

The fastest Wrap Dash time was set by Eric Peixoto of Incognito Wraps

Arlon’s Marketing Director of the Americas, Nicole Witt noted the wrap dash was a great success saying, “We wanted to create a competitive, yet exciting challenge that would attract talented installers of all levels to get hands-on with SLX Cast Wrap.” She went on to say, “We were thrilled with the engagement and buzz this created at the SGIA Show.”

Attendees gathering to watch the Wrap Dash Challenge

In addition to the Wrap Dash, attendees were lined up to get their chance to take a quick tour in the Dark Room Showcase. Visitors were able to experience the vibrant nighttime effects that IllumiNITE Wrap and R108 Conspicuity Tape can have together in adding impressions to corporate branding while keeping safety top of mind.

Other highlights included our wrap experts Matt Braswell and Louie Calma holding daily wrap demonstrations showcasing best practices for a successful installation using Arlon products. Arlon Sales Representatives we’re seen throughout the booth providing knowledge and details on all Arlon products.

Technical Sales team member Matt Braswell showing the benefits of IllumiNITE Wrap™

Overall, this show had fantastic energy. Arlon’s booth was a success in providing attendees with an interactive experience. From the Wrap Dash and the Dark Room Showcase to in-booth demonstrations, Arlon brought a fresh feel to the SGIA tradeshow.

Caring for Your Vehicle Wrap in Hot Weather

Jul 3,2018 / By Madi O'Connor / 7 Comments

Summer months are known for having the longest and hottest days of the year. During this time, the amount of UV exposure increases significantly. An extended amount of UV exposure is the greatest enemy to your vehicle wrap. In these hot weather months, your vehicle is going to be susceptible to damage caused by environmental factors. Protect your investment from damage by following the steps below:

What does Arlon do for Weather Testing?

When developing a product, Arlon tests products in extreme climates. We test new products in hot weather climates like Florida, California, and Arizona. During the testing process, we are constantly checking for browning, shrinking, and cracking. This is done to ensure that when you use our film your application will withstand the high temperatures.

What can you do to Protect Your Vehicle Wrap?

Keep Your vehicle Out of Direct Sunlight

After a period of time, the rays of the sun can take their toll on your vehicle. When you’re not driving your car, it’s best to keep it inside and away from harmful UV Rays. With this in mind, always try to park in a shaded area whenever available.

Use A Recommended Protective Overlaminate

Protective overlaminates are formulated to provide your vehicle wrap with UV protection. Overlaminates act as an additional barrier from the sun. Read more about the importance of overlaminates HERE.

Brush Off Dirt and Debris in Between Washes

In the summer months, dirt and airborne particles can be baked into the film, leaving a stain on the vehicle. This is most common in high volume traffic areas. The stain may appear as black dust or overspray but you will not be able to remove it from your vehicle. Always make sure to take a few minutes each day and brush off any particles that may have fallen on to your vehicle.

Hand Wash Weekly

How often you need to wash your vehicle will vary based on your location. You’ll know it’s time to wash your vehicle when you start to see a build up that cannot be wiped off by hand. On hot days, we recommend hand washing with cold-water, preferably in a shaded area. Wash with automotive grade car wash soap and follow the recommended dilution.

When temperatures hit triple digits, your wraps need a little extra care. By following the steps listed above, you can keep your vehicle wrap looking brand new.

LEAN’ing Into The Future

May 28,2015 / By Chuck Bules - Lean Manager / No Comment

Unlike the modern waistline these days LEAN as a business model is seriously trending. If you haven’t tried this excellent diet already you and your company are probably following an unconsciously sloppy lifestyle and leaving much cash on the table as a result. The money that is not going into your collective pocket is going either directly or indirectly into the pockets of your collective competition. Something to think about isn’t it?

Tag Archives: manufacturing

Arlon Provides an Interactive Experience at SGIA 2018

Share This:

Caring for Your Vehicle Wrap in Hot Weather

What does Arlon do for Weather Testing?

What can you do to Protect Your Vehicle Wrap?

Share This:

LEAN’ing Into The Future

Share This: