Tips and Tricks - AS_EN | Arlon Graphics

Tips & Tricks

Informational

Cut Graphic Film Adhesion Build (#15)

Digital Printing Preprint Considerations (#29)

Digital Printing: Graphic Protection (#31)

Digital Printing: On the Printer (#30)

Mottling of Vinyl Film (#13)

Overcoating and Decorating Vinyl Film (#19)

Paints and Coatings - Dry Versus Cured (#04)

Printing on Reflective Film (Series 2400 and Series 2450) (#12)

Proper Design for Airport Transit and Runway Signage (#27)

Reflective Film General Notes and Observations (#08)

Selection and Use of Application Paper (#11)

Shelf Life of Vinyl Film (#14)

What is Silvering? (#55)

Preparation

Cleaning a Vehicle Before Wrapping (#53)

Fleet Graphics Substrate Preparation (#45)

Surface Preparation (#01)

Wall Surface Test for Vinyl Compatibility (#39)

Installation

Application Rule of Thumb for All Graphic Film Installs (#02)

Application Tips for Marine Marking (#37)

Cold Weather Installation of Container Marking Film (#28)

Contour Cutting and Laminating Printed Vinyl (#40)

Digital Printing Installation (#32)

Digital Printing: Installation on Painted Walls (#33)

How to Install on Deep Channels - Cut and Drop Method (#48)

How to Install on Deep Channels: Using Inlay Strips with the Cut and Drop Method (#49)

How to Install on Rivets - Roller Methods (#50)

How to Install on Rivets - The Poke/Lance Method (#51)

Installation on Banner, Awning and Flexible Fabrics (#18)

Installation Technique for Channels (#38)

Installations in Very Cold Weather (#07)

Installing Fleet and Vehicle Wrap Films on Painted Tank Trailers (#09)

Lamination: Transfer Tape or Protective Overlaminating Film (#20)

Mixing Application Fluid (#47)

Outgassing and Installing Arlon Print Media (#34)

Pressure Washing Cast Vinyl (#25)

Reducing Bubbles Trapped by Vinyl Film (#17)

Removing Application Tape from Fleet and Vehicle Wrap Films (#23)

Thermoforming of Translucent Series 2500 (#24)

Use and Application For Etched Glass Film (#21)

Using Heat and Pressure to Increase Initial Adhesion (#16)

Vehicle Wrap Tips (#35)

Wall Wrap on Concrete, Masonry & Tile (#36)

Wet Applications (#03)

Window Glass Application (#05)

Post Installation

Application Tape Removal (#06)

Chemically Assisted Vinyl Film Removal (#10)

Cleaning Guide for DPF 390 and Flexface FX V2 (#43)

Fleet & Vehicle Wrap Removal (#44)

Fleet Graphics Post-Care & Cleaning Instructions (#46)

How to Clean Etched Glass Film (#54)

Tips on Cleaning a Wrapped Car (#41)

Vinyl Removal Procedure for Wall Graphics (#42)

Don't See What You're Looking For?

Many of these TIPS come from our customer feedback and questions so be sure to reach out to us so that we can help you and in turn help others as well! Arlon Technical Services is here for you.

Contact Customer Service