Series 2400

Reflective Film

Applications & Features

  • Superior flexibility.
  • Lay-flat liner.
  • 7 year durability – flat surfaces.
  • 5 year durability – irregular surfaces.
  • Excellent initial tack and ultimate adhesion.
  • Meets: DOT FP-85, Section 718 Federal Spec. L-S-300C ASTM-D 4956-89
  • Recommended with dry application methods only.

Performance & Physical Data

Property Test Methods Typical Value
Surface Finish Gloss Meter 60° Reflection 80% to 90%
Thickness Micrometer, Federal Bench Type 130 micron
Tensile Strength Tensile Tester 51 mm jaw seperation; crosshead speed of 5.1 mm/s, web direction ≥ 1.0 kg/cm width
Elongation Instron Tensile Tester as above ≥75% • Black ≥ 40%
Shelf Life Free from excessive moisture, temperature, direct sunlight 1 year from factory shipment
Application Temperature Range Immersed for 100 hours at 21°C 5°C to 38°C
15°C to 32°C optimum
Service Temperature Range Films applied to etched aluminum panels 24 hours prior to testing -54°C to 71°C
Peel Adhesion PSTC-1, 15 min RT, 21°C ≥ 0.78 kg/cm
Liner Release TLMI, 760 cm/min 15 g/cm
Humidity Resistance 1. LS-300 method 4.4.10
2. ASTM-D4956-89 		No appreciable effect
Fungus Resistance 1. LS-300 method 4.412
2. ASTM-D4956-89 		No appreciable effect
Gasoline Resistance Film applied to etched aluminum panels 24 hours prior to testing LS-300 method 4.4.6 No appreciable effect

Terms & Conditions

The following is made in lieu of all warranties expressed or implied:

All statements, technical information and recommendations published by Arlon relating to Arlon products are based on tests believed to be reliable and within the accuracy of the equipment used to obtain the specific values. Their accuracy or completeness is not guaranteed and Arlon makes no warranty with regard thereto. Seller’s and manufacturer’s only responsibility shall be to replace any quantity of the product proved defective. Seller and manufacturer shall not be liable for injury, loss or damage, direct or consequential, arising out of use or the inability to use the product. Nor shall seller or manufacturer be liable for any costs or expenses incurred in the processing or printing on the product. Before using, user shall determine the suitability of the product for its intended use. User assumes all risk and liability of every nature in connection therewith. No statements or recommendations other than those contained in the technical information published by Arlon shall have force or effect unless contained in an agreement manually signed by the of officers of seller and manufacturer.

Copyright © Arlon Graphics, LLC. All Rights Reserved.